Bandsaw Accessories

Tools Menu

Delta Circle Cutting Attachment Helps cut perfect circle from 3" to 50" in diameter. Includes an adjustable pivot pin to allow work to be rotated on a sander. Sturdy steel support leg adjusts to meet different table heights. Fits band saws with 3/8" x 3/4" miter gage grooves. Delta Height Attachment Includes Cast Block, Dowels, Bolt, Extension, and front and back Blade Guards. Features: Increases capacity under guide fro 6 1/4" to 12 1/4" Jet Bandsaw Accessories Model Stock Number 3 speed kit with hardware 708114 Rip fence assembly with resaw 708718R 6" riser block 708717 Mitre gauge 708716 Blade block set (JET BLOCKS) 708719 JET Bearing Guide System 708127 Paddock Bandsaw Guides Model #20 guides can be installed on any machine having at least 2-1/2" from back of blade to top guide post, and from back of blade to frame below table and will support blades from 1/4" to 2" wide. For 2" blade simply remove and reverse the center assembly. Do no remove the wheel from slides. Ball bearing guide wheels are 2-1/4" O.D. Model #10 guides can be installed on any machine having at least 2" from back of blade to top guide post, and from back of blade to frame below table and will support blades from 1/4" to 3/4" wide. Ball bearing guide wheels are 1-1/2" O.D. Model #0 guides can be installed on any machine having at least 1-1/2" from back of blade to top guide post, and from back of blade to frame below table and will support blades from 1/16" to 3/4" wide. Guide Bearings are 3/4" O.D. Carter Bandsaw Guides Carter Micro-Precision Guides provide precise control of the bandsaw blade using special Tefloy side support blocks. These hardened sintered steel blocks are vacuum impregnated with teflon material resulting in much lower friction and cooler running blades than with tool steel blocks. The teflon acts as a dry-film lubricant to reduce wear, lower friction , and increase useful life. Back support is provided by a double sealed ball bearing encased in a precision ground hardened steel wear ring. All Micro-Precision models feature vernier adjustment of the side blocks and complete flexibility of configuration. Each guide may be set up as either a right-hand or left-hand unit to ensure that the controls are always located in the most convenient position. Micro-Precision Guides are available in three models: CP10: Handles blade sizes from 3/16 inch to 1 3/4 inches; blade speeds up to 7,000 feet per minute; used on machines from 30 inches to 42 inches in wheel diameter. Overall size is 4 inches high, 4 1/4 inches wide, by 3 inches deep with a 3/4 inch diameter mounting hole. CP20: Handles blade sizes from 1/8 to 1 1/4 inches; blade speeds to 6,000 feet per minute; used on machines from 16 to 36 inch wheel diameters. Overall size is 3 inches high, 4 inches wide, by 2 1/2 inches deep with a 3/4 inch diameter mounting hole. CP30: Blade sizes from 1/8 to 3/4 inch; blade speeds to 5,000 feet per minute; used on machines from 14 to 20 inches in wheel diameter. Overall size is 2 1/4 inches high, by 3 inches wide, by 1 7/8 inches deep with 7/16 inch diameter mounting hole. Carter Guidall All Ball Bearing Guides are equipped with ball bearings on all 3 sides of the blade for maximum support with the least possible friction. Using double sealed bearings, these units provide unmatched durability and performance. All rolling contact on the blade means there is no surface wear due to friction thus eliminating the need for frequent readjustment of the side rollers. Once positioned for proper clearance with a given blade, they maintain that setting hour after hour, day after day for the most consistent cut possible. Extremely low friction means less heat buildup in the blades and less chance of blade damage when making tight radius cuts. Three basic styles are available: Model 500: compact, yet rugged; suitable for bandsaws from 14 to 30 inches in wheel diameter; able to handle blades from 3/16 to 1 1/4 inches in width at speeds up to 5,000 feet per minute. Model 600: similar to the Model 500 but larger; suited for saws from 30 to 42 inches in wheel diameter; able to handle blades from 1/4 to 2 1/2 inches in width at speeds up to 5,000 feet per minute Model 400: extra heavy duty construction; utilizes oversize side support rollers and double bearing back up wheel; suitable for saws from 30 to 42 inches in wheel diameter; covers blade widths from 1/4 to 2 1/2 inches at speeds up to 11,000 feet per minute. Wright Tooling available
Home | New Machinery | Used Machinery | Tools, Parts, & Accessories | Leasing | Our Team | Contact Us | Special of the Month