• Quick change chucks
• 10" Long fence for line boring with 4 stops
• Mitre fence
• Central fence
• Reference pin

	Adjustable Fences
			New adjustable fences guarantee precision dowel boring even out of square cut panels. This feature is essential in order to get precise work. New digital counter for decimal adjustment of fence shifting on the table (excursion 34 mm). This system, quick and exact, allows the adjustment of any drilling distance and the symmetric positioning between 2 fences.
			Quick and easy to rule out the fences from the table.
			Irregular fitting.     Perfect fitting.     Fence at 90 degrees, out of square panel. Way to get precise work.

	Central Fence
			Central fence for drilling frames, rails and stiles.
			Mitre fence for drilling mitred frames.

 

	Rear Fence
			Rear Fence New rear (back) fence which can be set to max. 300 mm. For fitting of panels bored horizontally and vertically. For the execution of the third line of holes setting the fence at max. 300 mm.
			Rear Fence For the execution of holes transversally on the panels at max. 300 mm with no need of using the long fence (1,5 mt or 3 mt).

 

	Long Fence
			Transverse adjustment of long fence with stops for execution of transverse bores to insert hold tables.
			Lengthwise adjustment of long fence with 4 stops for execution of line bores on big dimension panels.

 

	Drivers and Working Table
			Front Electric Drives All drives are located on the front side of the machine with easy access. Electric panel according to CE safety regulations. - No voltage release - Magnetic switch protecting the motor - Low voltage release (24 volt) - Emergency stop button Working Table Working Table 1200 x 410 mm composed by 2 sides. - Steel reference table - MDF working table and scratchproof coating The ergonomic shape of this table and its material make it easier to position the panel and avoid making any scratches.

 

	Safety Clamps
			Thrust Meter: Safety device ensuring the minimum working pressure. Patented Safety Clamps Our clamps allow a prompt setting on panels of any dimension, without any adjustments. Safety System: clamps have been studied to prevent the crushing of the operator's hand. The maximum height of the clamp from the table is 80 mm.

 

	Spiral System
			Programming and boring depth adjustment on horizontal and vertical positions for standard drilling of the following lengths: 57,5 - 70 - 77 - 85 - 105 covering the full length range necessary for any type of operation.
			This PATENTED reference system is easy and innovative and allows a quick and exact setup of boring dpeth with the following operations. Choose the type of drill. Decide boring depth readable directly on the scale. Turn the spiral positioning of the transparent insex on the required depth. Lock the spiral with the handle.

 

 

	Stop Reference Pin
			Stop Reference Pin Stop reference pin for quick execution of line bores. It can be fixed on the sides of the machine. It is useful in case you don't have the long fence. (1,5 mt or 3 mt).
			Drilling capacity with tools maximum diameter 40 mm. for hinges with chaser in 3 positions. Additional positions can be reached moving the head unit 40 mm away from the chaser.

Technical Data Spindles (15 left red/14 right black) 29 Distance between spindle centers 32 mm. Distance between the first and last spindle center 35 9/32" Max. hole depth 4" Bush for quick change drill inside diameter 3/8" Max. dimensions of the part to be worked 45" x 118" Working table height 33" Table dimensions 46" x 16" Motor # 1 Motor power 2 (1,5) Motor rpm 2800/3360 Clamp # 4 Weight 855 lbs.

Dimensions