1566 W. Lincoln
Anaheim, CA 92801
(714) 772-2501
(714) 772-0970 Fax
cwmc@calwoodmach.com
|
 |
|
- Spindle assembly is mounted to the bottom of the table
- Extra large, heavy cast iron table with
t-slot mitre gauge
- Two reversible spindle speeds (forward & reverse)
- Work piece hold-downs are fully adjustable
- Safe, easy cutter set up is assisted by a positive detent spindle
lock
- Left and right fences are independently adjustable
- Dust collection port is built into the fence
STANDARD EQUIPMENT
- Motor with magnetic controls
- Reversing switch
- Adjustable fence with 4" dust collection port
- Mitre gauge
- Starting pin
- Work piece hold-downs
- 1/4" and 1/2" collet router bit adapters
- 1/2" , 3/4" and 1" spindles
| Stock Number (5 HP, 3 Ph): |
1791274 |
|
|
| Model: |
25A |
|
|
| Spindle Speeds (RPM): |
6500 and 10000 |
|
|
| Table Size (WxD/in): |
29-1/4 x 25-1/2 |
|
|
| Table Opening Diameter (in): |
6-3/16 |
|
|
| Insert Opening Diameter (in): |
3-1/4 |
|
|
| Fence Size (in): |
13-5/16 x 2-7/8 |
|
|
| Spindle Size (in): |
1/2, 3/4, 1 |
|
|
| Under Nut (in): |
1/2 x 3-1/2, 3/4 x 3-1/2, 1 x 3-1/2 |
|
|
| Router Bit Collet Size (in): |
1/4, 1/2 |
|
|
| Spindle Travel (in): |
3-3/4 |
|
|
| Overall Dimensions (WxDxH/in): |
25 x 29 x 37 |
|
|
| Motor: |
3 HP, 1 Ph, 230V or 5 HP, 3 Ph, 230V |
|
|
| Shipping Weight (lbs): |
400 |
|
|
|
Home | New Machinery | Used Machinery | Tools, Parts & Accessories | Leasing | Our Team | Contact Us | Special of the Month
|
| |
|
|
