Guards, aluminum dust spouts & hand brakes are standard equipment. This shaper is shown with 30" spindle centers.
Northfield Double Spindle Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. Available with either 24" or 30" between spindle centers. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust & chip extraction.
Specifications
Diameter of Spindle (standard machine) . . . . . . . . . . . . . . . 1"
Vertical Adjustment of Spindle . . . . . . . . . . . . . . . . . . . 4-1/2"
Length of Spindle at Collar . . . . . . . . . . . . . . . . . . . . 5"
Size of Table: 24" center machine . . . . . . . . . . . . . . . . . 30" x 60"
30" center machine . . . . . . . . . . . . . . . . . 30" x 66"
Distance Between Spindles . . . . . . . . . . . . . . . . . . . . . 24" Std. or 30"
Height of Table Top . . . . . . . . . . . . . . . . . . . . . . . . 34-1/2"
Spindle Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,000 RPM
Spindle Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . RH Spindle: Counterclockwise
LH Spindle: Clockwise
Size of Dust Spout . . . . . . . . . . . . . . . . . . . . . . . . . 4"
4" dust spout requires approx. 400 CFM air flow for dust collection
Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 5, 7-1/2, 10, 15 TEFC
Size of Throat Hole (Standard Machine) . . . . . . . . . . . . . . . 4-1/2"
Floor Space: 24" center machine . . . . . . . . . . . . . . . . . . 44" x 60"
30" center machine . . . . . . . . . . . . . . . . . . 44" x 66"
Domestic Shipping Weight . . . . . . . . . . . . . . . . . . . . . . 2000 lbs.
Export Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . 2300 lbs.
Cubic Measure Export Boxed . . . . . . . . . . . . . . . . . . . . . 96 cu. ft.
Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208, 230/460, 575 3 ph 60 hz
Extras
K-50 fence with hold down springs
Micrometer adjust for K-50 fence
3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
8" spindle length 1-3/8, & 1-1/2 solid spindle
Opposite spindle rotation RH-CW, LH-CCW
Reversing solid spindle with reversing switch
Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
6" front and rear table extensions
Detachable router top 1/2" hole
6000 & 4000 RPM spindle speed
NEMA 12 electrics with fused disconnect
24-volt push-button
Hand brake in lieu of foot brake
Switch to disconnect power upon actuation of brake
Miter gauge and dovetail slot (table ends only)
Clockwise spindle rotation
Miter gauge with dovetail slot
Single phase 3, 5, 7-1/2" hp, 220-volt
Throat hole and plates available: 8", 6-1/2" and nested
Modifications to customer's order
|
|
|
