Guard, aluminum dust spout & foot brake are standard equipment
Northfield Heavy Duty Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. The 44" x 72" table provides room for mounting feeders and gives full support for large jigs and fixtures. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust & chip extraction.
Specifications
Diameter of Spindle (standard machine) . . . . . . . . . . . . . . . 1"
Vertical Adjustment of Spindle . . . . . . . . . . . . . . . . . . . 4-1/2"
Length of Spindle at Collar . . . . . . . . . . . . . . . . . . . . 5"
Size of Table . . . . . . . . . . . . . . . . . . . . . . . . . . . 44" x 72"
Height of Table Top . . . . . . . . . . . . . . . . . . . . . . . . 37"
Spindle Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,000 RPM
Spindle Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . Counterclockwise
Size of Dust Spout . . . . . . . . . . . . . . . . . . . . . . . . . 4"
4" dust spout requires approx. 400 CFM air flow for dust collection
Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 5, 7-1/2, 10, 15 TEFC
Size of Throat Hole . . . . . . . . . . . . . . . . . . . . . . . . 4-1/2"
Floor Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 width x 48 deep
Domestic Shipping Weight . . . . . . . . . . . . . . . . . . . . . . 2700 lbs.
Export Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . 3100 lbs.
Cubic Measure Export Boxed . . . . . . . . . . . . . . . . . . . . . 104 cu. ft.
Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208, 230/460, 575 3 ph 60 hz
Extras
K-50 fence with hold down springs
Micrometer adjust for K-50 fence
3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
8" spindle length 1-3/8, & 1-1/2 solid spindle
Reversing solid spindle with reversing switch
Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
Detachable router top 1/2" hole
Collet spindle (3/4" max collet bore)
6000 & 4000 RPM spindle speed
NEMA 12 electrics with fused disconnect
24-volt push-button
Switch to disconnect power upon actuation of brake
Clockwise spindle rotation
Single phase 3, 5, 7-1/2" hp, 220-volt
Throat hole and plates available: 8", 6-1/2" and nested
Digital read-out spindle position
Spindle crank on front of machine
Modifications to customer's order
|
|
|
