California Woodworking Machinery

1566 W. Lincoln
Anaheim, CA 92801
(714) 772-2501
(714) 772-0970 Fax
cwmc@calwoodmach.com

18" Radial Saw

SPECIFICATIONS

MOTOR :

Motor (TEFC) - 7-1/2 HP, 230/460V, 60 Hz., 3 phase - 5 HP, 230 V, 60 Hz., 1 phase

TABLE :

Size - 44" x 36-1/2" (1118 x 927 mm)

Height - 32" (813 mm)

WEIGHT :

Weight - 745 Lbs. (338 Kg)

SPEED :

Speed - 3450 rpm

DIAMETER of ARBOR :

Diameter of Arbor - 1" (25 mm)

CAPACITIES :

Crosscut (1" deep) - 29" (737 mm)

Miter at 45 deg. R & L (1" deep) - 22" (559 mm)

Maximum out rip - 41" (1041 mm)

Maximum depth of cut - 4-7/8" (124 mm)

Maximum depth of cut (without leaf guard) - 6-1/16" (168 mm)

Maximum depth of cut at 45 deg. bevel - 3" (76 mm)

Maximum depth of cut (without leaf guard) - 3-1/4" (83 mm)

Maximum width of dado - (using standard motor side flange) 2" (51 mm)

BEVEL STOPS :

Bevel Stops - 0 deg., 30 deg., 45 deg., 60 deg. and 90 deg.

MITER STOPS :

Miter Stops - 90 deg. and 45 deg. R & L

OVERALL HEIGHT :

Overall Height - 76" (1930 mm)

Model 33-420
18" Radial Saw

Includes basic machine, TEFC motor with electro-mechanical blade brake; 14" blade guard with anti-kickback attachment; retractable leaf guard; cutterhead return attachment; 14" combination blade, cuttinghead clamp knob; adjustable crosscut stop and steel legs.

FEATURES:

Exclusive "Turret Arm" construction. Permits sawblade to rotate a full 360 deg. above the work table. Gives full table capacity for cutting both right and left hand miters.
Unique "Micro-Set" miter stops. Individual adjustable stops assure perfect 90 deg. and 45 deg. R & L miter cuts for the life of the saw.
Lifetime trackways. Track rods feature glass-smooth hardened surfaces to minimize roller friction. Easily rotate to provide a new bearing surface for a lifetime of precision accurate cutting.
Totally enclosed direct drive motor. Fully protected from damaging dust, dirt and moisture. No gears or belts. Delivers plenty of power and speed directly to the saw blade for tough, big capacity cutting. Integral electro-mechanical brake stops blade in seconds. Improves operator safety and productivity.
"Up-Front" controls. All operating controls including the blade elevating crank are conveniently located "up-front" for safe, easy operation.
Positive table leveling jacks. Six strategically located table leveling jacks help sustain new saw table-to-track arm parallelism for continued cutting accuracy.
Sturdy base frame construction. Extra deep channel base frame, rigidly reinforced be a cast iron center piece, guarantees continuous alignment of the entire machine.
Extra-large table. Measures a full 44' x 36-1/2". Provides maximum work support for large capacity cutting jobs.
24-Volt safety control system. A low 24 volts at the push button station for extra operator safety. Magnetic motor control provides on-off control, low-voltage control and no-voltage control.
Handy fence lock knobs. Allow you to adjust and lock-in the desired fence position from the front of the machine. Saves time, especially when cutting varying widths of stock.
Cutterhead return attachment. Speeds up production. Returns cutterhead automatically behind fence after cut. Clears way so material can be repositioned for next cut.
Big cutting capacity. Featurs an extra-long turret arm that enables you to outboard rip a full 41", crosscut 29" at 1" depth of cut and miter 22" at 45 deg. R or L.