Model 750SS - economy, performance and famous Onsrud Inverted Router design
Onsrud Inverted Routers have dominated other price categories in terms of design and performance. But until now, there wasn't an Onsrud Inverted Router available in the mid-price range.
The Onsrud model 750SS bridges the gap between smaller and larger pin routers--and proves that Onsrud can give you more for your money in any price category.
Onsrud Inverted router design means
- Cutter enters wood from underneath.
- Pattern and guide pin are on top for easy reference--in full view of the operator.
- Greater stability of the workpiece and cutter results in smoother cuts and makes work easier.
- Depth register is more accurate using the fixed position of the table as the reference point.
- Workpiece cannot be "pulled" into a spiral bit (the way it can sometimes be pulled into an overhead bit).
- Under-the-table vacuum sawdust and chip removal system works along with gravity to keep sawdust and chips out of the way--even on deep cuts--eliminating the major cause of bit chatter and burns. It also allows for faster cuts
Specifications
Solid construction using only the finest components has given Onsrud Inverted Routers a reputation for excellence.
The model 750SS gives you
Precision performance with medium depth cuts (up to 3/4" with oak or 1" with pine, for example).
5 horsepower three phase motor (single phase optional) for 20,000 rpm through a heavy duty spindle.
30" throat.
Pneumatically retracting cutter and guide pin.
Fog mist lubricated bearings.
Automatic prelubrication of spindle bearings each time spindle is started--bearings never start dry.
Self-releasing collet (no risky tapping of expensive carbide bits to free them).
Full one year limited warranty.
A 24" x 36" x 1 1/2" acrylic-topped table that absorbs cutting vibrations without marring the workpiece (other tables available on request).
Direct factory "Hot Line" for technical support.
The 750SS Inverted Router is ideal for production facilities where the extreme versatility and sophistication of the larger Onsrud machine series is not needed. The 750SS runs at a constant 20,000 rpm--perfect for use with small to medium size cutters that don't require a variable speed machine. So now you can have famous Onsrud Inverted Router design, performance and quality in a mid-priced machine.
Requirements
- Dust collection: 500 CFM
- Compressed air: 80 psi, 4.5 CFM
- Shipping weight: 1100 lbs.
|
