Model 9600 B - Cartridge Filter
This model contains 4 cartridge filters that clean to .5 micron. It features push button cleaning, which requires a button to be pushed 3-5 times a day, thereby releases a large amount of compressed air into filters. The air pulses off the dust, which drops into drawers below the filters. The drawers should be cleaned a few times a month, or as needed. These tables are designed to set end to end, allowing filters and drawers to be serviced from the front of the machine. The top, as with all other models, has a spray on rubber type finish.
- Size - 48" X 96" Height - 36"
- Weight - 1200 lbs
- 4800 SFM After Filters
- Motor - 5HP - 3PH OR 1PH
- Voltage - 220 - 1PH, 230 - 3PH, 460 - 3PH, and 575 - 3PH
- Sound Level - 82 Decibels
Contains two cartridge filters that clean to 0.5 micron. Push button cleaning requires button to be pushed 3-5 times daily. When the button is pushed it releases a large volume of compressed air into the filters allowing the dust to fall into a drawer to be emptied as needed. Options include a timer so the operator doesn't have to push the cleaning button.
General Information
- MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
- RECEPTACLES You must bring power into them from an electrical source outside the table.
- CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
- HEIGHTS may be altered, call for information.
- TOPS are ¾" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
- HYDRAULIC MOTORS are available to run fans.
- WARRANTY one year parts and labor except filters. Filters are standard filters and may be purchased from Denray or other suppliers.
|
|
|
