The Air-Vac-Clamps, which easily connect to any clean compressed air line, use a minimum of 85 pounds of air pressure. The system's advanced venturi non-electric pump prevents clogging or damage by dirt or dust. The venture pump has no moving parts and requires minimal maintenance. These units use about 6 CFM's (cubic feet per minute) of free air flow. A foot controlled On/Off switch activates and releases the vacuum. The top plate dimensions are 11+7/8" x 15+7/8"; each is 36" from the floor with the perimeter having a gasket of closed-cell neoprene. The feet on each unit have been drilled so that the unit can be bolted to the floor if required. The Air-Vac-Clamp units are self-contained and arrive completely assembled, ready to use. All Air-Vac-Clamp units can be shipped United Parcel Service or Common Carrier.

Model #AV-10-382, the Quick Clamp, is designed for lightweight or rout-to-pattern work. This unit has a removable top plate made from high density particle board with high pressure laminate on both sides. It easily adapts to custom applications: simply by building your own top plate, which will slide easily into place and quick couple to the venturi pump. Once locked into place it is ready to use. This unit has a welded steel stand with an open front to easily reach the quick coupler when releasing the top plate. Approximate shipping weight is 46 pounds.